How do you remove and install the liftgate latch, lock cylinder, and support struts on Acura Integra?

Open the liftgate and remove the trim cover along with the latch mounting screws. Disconnect the actuating rod, detach any electrical connectors, and then take out the latch from the liftgate, reversing the process for installation. For the lock cylinder, remove the bolt securing it, detach the actuating rod, rotate the lock cylinder, and pull it out, again reversing the process for installation. To work on the support struts, open the liftgate and support it securely. Use an open-end wrench to remove the ballstud nut at the upper end of the strut. Detach the trim cover and pry off the retaining clip from the lower end's locating pin, then pull the lower end off and remove the strut from the vehicle. Some models may have retaining bolts at both ends of the strut; in such cases, simply remove the bolts to detach the strut. Installation follows the reverse of removal.

Genuine Acura Integra Lift Support

Lift Support Shocks

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Lift Supports found

View related parts
Acura Integra Ball Stud
Part Number: 85269-SH3-003
$9.08 MSRP: $12.97
You Save: $3.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud, Ball ; Support Cylinder Ball Stud
- Replaces: 85269-SA0-003, 85269-SF4-003, 85269-SB3-000, 85269-SA0-023, 85269-SA0-013
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1986-1989 Acura Integra
View related parts
Acura Integra Stay, Hood Open
Part Number: 74145-T20-A00
$6.61 MSRP: $9.22
You Save: $2.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Support Rod
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 2023-2024 Acura Integra
View related parts
Acura Integra Stay Set, Right
Part Number: 74820-3S5-305
$30.08 MSRP: $41.95
You Save: $11.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: STAY SET, R.; Lift Cylinder
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 2023-2024 Acura Integra
View related parts
Acura Integra Stay Set, Left
Part Number: 74870-3S5-305
$32.96 MSRP: $45.97
You Save: $13.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: STAY SET, L.; Lift Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 2023-2024 Acura Integra
View related parts
Acura Integra Stay Set, Right
Part Number: 74820-3S5-306
$46.04 MSRP: $64.22
You Save: $18.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: STAY SET, R.; Lift Cylinder
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 2023-2024 Acura Integra
View related parts
Acura Integra Stay Set, Left
Part Number: 74870-3S5-306
$46.04 MSRP: $64.22
You Save: $18.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: STAY SET, L.; Lift Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 2023-2024 Acura Integra
View related parts
Acura Integra Tailgate Open Stay Assembly
Part Number: 74820-ST7-003
$96.81 MSRP: $135.82
You Save: $39.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stay Assembly, Tailgate Open
- Replaced by: 74820-ST7-013
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1994-1995 Acura Integra
View related parts
Acura Integra Tailgate Open Stay Assembly
Part Number: 74820-SK7-003
Product Specifications
- Other Name: Stay Assembly, Tailgate Open
- Replaced by: 74820-SK7-A03
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1990-1993 Acura Integra
View related parts
Acura Integra Driver Side Tailgate Open Stay Assembly
Part Number: 74870-ST7-305
Product Specifications
- Other Name: Stay Assembly, Driver Side Tailgate Open ; Support Cylinder; Lift Cylinder, Support Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1998-2001 Acura Integra
View related parts
Acura Integra Left Trunk Lift Support Strut Shock
Part Number: 74870-ST7-306
Product Specifications
- Other Name: Stay Assembly, Driver Side Tailgate Open ; Support Cylinder; Lift Cylinder, Support Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1998-2001 Acura Integra
View related parts
Acura Integra Liftgate-Lift Cylinder
Part Number: 74820-ST7-326
$121.35 MSRP: $171.40
You Save: $50.05 (30%)
Product Specifications
- Other Name: Stay Assembly, Passenger Side Tailgate Open ; Support Cylinder; Lift Cylinder, Stay, Support Cylinder
- Replaces: 74820-ST7-A02, 74820-ST7-305, 74820-ST7-315, 74820-ST7-A01, 74820-ST7-306, 74820-ST7-316, 74820-ST7-325
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1994-2001 Acura Integra
View related parts
Acura Integra Hood Opener Stay
Part Number: 74145-SR3-000
Product Specifications
- Other Name: Stay, Hood Opener ; Support Rod; Support Rod
- Replaces: 74145-SR3-A00
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1994-2001 Acura Integra
View related parts
Acura Integra Hood Opener Stay
Part Number: 74145-SR3-A00
Product Specifications
- Other Name: Stay, Hood Opener
- Replaced by: 74145-SR3-000
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1994-1995 Acura Integra
View related parts
Acura Integra Hood Open Stay
Part Number: 63441-SD2-020
Product Specifications
- Other Name: Stay, Hood Open ; Support Rod; Support Rod
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1986-1989 Acura Integra
View related parts
Acura Integra Hood Opener Stay
Part Number: 74145-SK7-000
Product Specifications
- Other Name: Stay, Hood Opener
- Replaced by: 74145-SK7-305
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1990 Acura Integra
View related parts
Acura Integra Hood Opener Stay
Part Number: 74145-SK7-010
Product Specifications
- Other Name: Stay, Hood Opener ; Support Rod; Support Rod
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1990-1993 Acura Integra
View related parts
Acura Integra Tailgate Open Stay Assembly
Part Number: 74820-SK7-A01
Product Specifications
- Other Name: Stay Assembly, Tailgate Open
- Replaced by: 74820-SK7-A03
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1990 Acura Integra
View related parts
Acura Integra Hatchback Gas Charged Lift Supports Struts Shocks
Part Number: 74820-SK7-A02
Product Specifications
- Other Name: Stay Assembly, Open
- Replaced by: 74820-SK7-A03
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1990-1993 Acura Integra
View related parts
Acura Integra Tailgate Open Stay Assembly
Part Number: 85270-SD2-013
Product Specifications
- Other Name: Stay Assembly, Tailgate Open
- Replaced by: 85020-SD2-020
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1986-1989 Acura Integra
View related parts
Acura Integra Tailgate Open Stay Assembly
Part Number: 85270-SD2-A11
Product Specifications
- Other Name: Stay Assembly, Tailgate Open
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1987-1988 Acura Integra

Acura Integra Lift Support

We provide a broad range of OEM Acura Integra Lift Support at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura Integra Lift Support Parts Questions & Experts Answers

Tailgate Open Stay Assembly
74820-ST7-003
Q: How do you remove and install the liftgate latch, lock cylinder, and support struts on Acura Integra?
A: Open the liftgate and remove the trim cover along with the latch mounting screws. Disconnect the actuating rod, detach any electrical connectors, and then take out the latch from the liftgate, reversing the process for installation. For the lock cylinder, remove the bolt securing it, detach the actuating rod, rotate the lock cylinder, and pull it out, again reversing the process for installation. To work on the support struts, open the liftgate and support it securely. Use an open-end wrench to remove the ballstud nut at the upper end of the strut. Detach the trim cover and pry off the retaining clip from the lower end's locating pin, then pull the lower end off and remove the strut from the vehicle. Some models may have retaining bolts at both ends of the strut; in such cases, simply remove the bolts to detach the strut. Installation follows the reverse of removal.

Related Acura Integra Parts

Browse by Year

2024 Lift Support 2023 Lift Support 2001 Lift Support 2000 Lift Support 1999 Lift Support 1998 Lift Support 1997 Lift Support 1996 Lift Support 1995 Lift Support 1994 Lift Support 1993 Lift Support 1992 Lift Support 1991 Lift Support 1990 Lift Support 1989 Lift Support 1988 Lift Support 1987 Lift Support 1986 Lift Support