How to Replace a Clutch Release Cylinder?

Disconnect the battery's negative cable, raise the vehicle and support it with jackstands. Detach the fluid hose and remove the Clutch slave cylinder. Remove the pushrod, and boot, then eject the piston, cups, and spring. Inspect the cylinder bore and clean components with brake fluid or cleaner. Using the rebuild kit, assemble the components with brake fluid. Install the Clutch slave cylinder, connect the hydraulic line, fill the clutch master cylinder with DOT 3 brake fluid. Bleed the system, lower the vehicle and reconnect the battery cable.

Genuine Acura Legend Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Clutch Slave Cylinders found

View related parts
Acura Legend Cylinder Assembly, Slave (Nissin)
Part Number: 46930-SD4-003
$52.89 MSRP: $75.55
You Save: $22.66 (30%)
ADD TO CART
Product Specifications
- Other Name: Slave Cylinder
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1986-1987 Acura Legend
View related parts
Acura Legend Cylinder Assembly, Slave (Nissin)
Part Number: 46930-SG0-A02
$56.53 MSRP: $80.72
You Save: $24.19 (30%)
ADD TO CART
Product Specifications
- Other Name: Slave Cylinder
- Replaces: 46930-SG0-A01
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1987-1988 Acura Legend
View related parts
Acura Legend Cylinder Assembly, Slave
Part Number: 46930-SD4-901
Product Specifications
- Replaced by: 46930-SD4-902
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1989-1990 Acura Legend
View related parts
Acura Legend Cylinder Assembly, Slave
Part Number: 46930-SP0-A01
Product Specifications
- Other Name: Slave Cylinder
- Warranty: This genuine part is guaranteed by Acura's factory warranty.
Fits for 1991-1995 Acura Legend

Acura Legend Clutch Slave Cylinder

The Clutch Slave Cylinder in Acura Legend vehicles is connected to the Clutch Master Cylinder and once the clutch pedal is pressed to disengage the clutch for shifting gears. This hydraulic element is supplied with pressure from the master cylinder; it has a rod that pushes a lever or fork to release the clutch. Because any problem with the clutch slave cylinder negatively affects the car's operational mode and the safety of the gear shift, replacement of the should be done as soon as possible for the sake of drivability. The master cylinder in Acura Legend vehicles reestablish force from the driver as hydraulic pressure to oversee the slave cylinder in giving clean clutch operation of the gears as well as risk free gear shifting.

We provide a broad range of OEM Acura Legend Clutch Slave Cylinder at unbeatable prices on our website. For your OEM parts, You can count on the guaranteed quality, manufacturer's warranty, outstanding customer service, and prompt delivery. We look forward to your visit.

Acura Legend Clutch Slave Cylinder Parts Questions & Experts Answers

Cylinder Assembly, Slave (Nissin)
46930-SD4-003
Q: How to Replace a Clutch Release Cylinder?
A: Disconnect the battery's negative cable, raise the vehicle and support it with jackstands. Detach the fluid hose and remove the Clutch slave cylinder. Remove the pushrod, and boot, then eject the piston, cups, and spring. Inspect the cylinder bore and clean components with brake fluid or cleaner. Using the rebuild kit, assemble the components with brake fluid. Install the Clutch slave cylinder, connect the hydraulic line, fill the Clutch Master Cylinder with DOT 3 brake fluid. Bleed the system, lower the vehicle and reconnect the battery cable.