Acura 17045-S3V-A00 Fuel Pump Module Assembly

Once reassembly is complete, start the engine and check for fuel leaks at the pump fuel line connections to ensure everything is properly sealed and functioning.

There is no specific instruction provided for relieving the fuel system pressure in the given paragraph.

For these models, a special adapter is required to measure pressure. Follow these steps: 1.Disconnect the negative battery terminal. 2.Separate the fuel supply line quick-connect fitting on the firewall and attach the fuel pressure gauge. 3.Reconnect the battery and turn the ignition to ON. 4.Evaluate the pressure when the engine is warmed up. 5.If the pressure is not within the specified range, inspect fuel lines, replace the fuel filter if necessary, and consider replacing the fuel pressure regulator. 6.After testing, relieve fuel pressure, disconnect the battery terminal, remove the testing rig, and reattach the fuel supply line.