Acura 77100-ST7-A00ZB Panel Assembly, Instrument (Medium Taupe)

You can Select Your Vehicle to check if 77100-ST7-A00ZB fits your vehicle.

Disconnect the cable from the negative terminal of the battery, ensuring you have the correct activation code for the radio's anti-theft system if applicable. Remove the steering wheel, center floor console, instrument cluster bezel, and instrument cluster. Take off all dashboard trim panels, detach the nuts and bolts securing the fuse box and hood release handle, and lower the steering column. Remove the screws and pry out the air vent grilles, then pry out the driver's and passenger side lower kick panels, and remove the instrument panel trim cover on the passenger side if equipped. Remove the screws from each end of the instrument panel and take out the radio and heater control assembly. Remove the screws securing the lower center part of the instrument panel and the bolts retaining the upper front edge of the instrument panel to the firewall. Pull the instrument panel towards the rear of the vehicle, detaching any electrical connectors that interfere with removal, then lift the instrument panel over the steering column and remove it from the vehicle. Installation is the reverse of removal.