Acura 52611-S0K-A51 Rear Shock Absorber Unit

You can Select Your Vehicle to check if 52611-S0K-A51 fits your vehicle.

If the shocks or coil springs show signs of wear such as leaking fluid, loss of damping capability, or physical damage like chips, sagging, or cracks, consider all options before starting any work. The shock absorbers or coil springs cannot be serviced individually and must be replaced if issues arise, although complete assemblies may be available on an exchange basis, saving time and effort. Before disassembling the vehicle, check the cost and availability of parts. Begin by removing the shock absorber/coil spring assembly, working on one assembly at a time to avoid mixing parts. Mount the assembly in a vise, using wood or rags to protect it, and avoid over-tightening. Install the spring compressor according to the manufacturer's instructions, compressing the spring enough to relieve pressure from the upper spring seat, which can be confirmed by wiggling the spring. Mark the orientation of the upper mount relative to the spring or damper unit for proper reinstallation. Use an Allen wrench to hold the shock damper rod while unscrewing the self-locking retaining nut with a box-end wrench. Disassemble the parts in the order they are removed. For reassembly, carefully place the spring onto the shock absorber body, ensuring it rests in the lowest part of the seat, use a new self-locking nut, and tighten it to the specified torque. Before releasing the spring compressor, ensure the upper mount is oriented as it was originally. Once the spring compressor is removed, the assembly is ready for installation.

Follow the appropriate guidelines.

Remove the damper fork-to-shock absorber pinch bolt and the damper fork-to-lower control arm bolt to detach the fork.