Acura 52300-SEP-A21 Rear Stabilizer Spring

You can Select Your Vehicle to check if 52300-SEP-A21 fits your vehicle.

Loosen the rear wheel lug nuts, raise the rear of the vehicle, place it securely on jackstands, and remove the rear wheels. Remove the sway bar-to-link nuts, taking off the upper or lower link nut; if replacing the link, remove both nuts. Use an Allen wrench to prevent the ballstud from turning when removing the link nut, and to remove the link entirely, simply take off the nuts at each end of the link. Unbolt the bushing bracket from each side of the Sway Bar Kit and then remove the bar. Pull the retainers off the bar and inspect the bushings for cracks, breaks, and other signs of deterioration; if damaged, replace them. Also check the sway bar links for loose balljoints and other damage, replacing them if necessary. Installation is the reverse of removal, using new self-locking nuts to attach the sway bar links.

The need to remove the stabilizer bar often arises from damage due to an accident, which may also affect other major components like the subframe.