Acura 52300-ST7-Z01 Rear Sway Bar

You can Select Your Vehicle to check if 52300-ST7-Z01 fits your vehicle.

To remove the Sway Bar Bushing, undo the rear wheel lug nuts, raise the vehicle, place it on jack stands, and remove the rear wheels. Remove the Sway Bar Kit-to-link bolts and the Sway Bar Kit-to-body clamp bolts and remove the Sway Bar Kit and if the bushings are damaged, replace them. Installation is the reverse of removal.

Apply the parking brake and loosen the front wheel lug nuts. Raise the front of the vehicle and support it securely on jackstands, then remove the wheels. Detach the stabilizer bar links from the bar, then remove the bolts which attach the stabilizer bar brackets to the underside of the vehicle. Pull the brackets off the stabilizer bar and inspect the bushings for cracks, hardness and other signs of deterioration. If the bushings are damaged, replace them. Installation is the reverse of removal.